Controllable Electronic Structures and Photoinduced Processes of Bay‐Linked Perylenediimide Dimers and a Ferrocene‐Linked Triad

A series of perylene‐3,4,9,10‐bis(dicarboximide) (PDI) dimers linked through the bay regions was systematically synthesized to examine the electronic structures and photophysical properties in dependence on the distance and orientation between the two PDI units. The spectroscopic and electrochemical measurements suggested that the coupling value of a directly linked PDI dimer (PDI)₂ is much larger than those of para‐ and meta‐phenylene‐bridged PDI dimers p‐(PDI)₂ and m‐(PDI)₂. The width of Davydov splitting was quantitatively evaluated to compare the coupling values between the two PDI units in these dimers by absorption spectroscopy in frozen 2‐methyl‐THF. Excimer formation of PDI dimers induced the strong fluorescence quenching and large red‐shifts. Femtosecond transient absorption revealed a broad absorption derived from an excimer in the range from about 600 nm to the near‐IR region. The rate constants of formation and decay of the excimer are strongly dependent on the coupling values. Time‐resolved measurements on ferrocene‐linked p‐(PDI)₂ revealed a competition between the photoinduced processes of electron transfer and excimer formation in PhCN, which is in sharp contrast with the sole electron‐transfer process in toluene.     

Highly Functionalized Cyclopentane Derivatives by Tandem Michael Addition/Radical Cyclization/Oxygenation Reactions

Densely functionalized cyclopentane derivatives with up to four consecutive stereocenters are assembled by a tandem Michael addition/single‐electron transfer oxidation/radical cyclization/oxygenation strategy mediated by ferrocenium hexafluorophosphate, a recyclable, less toxic single‐electron transfer oxidant. Ester enolates were coupled with α‐benzylidene and α‐alkylidene β‐dicarbonyl compounds with switchable diastereoselectivity. This pivotal steering element subsequently controls the diastereoselectivity of the radical cyclization step. The substitution pattern of the radical cyclization acceptor enables a switch of the cyclization mode from a 5‐exo pattern for terminally substituted olefin units to a 6‐endo mode for internally substituted acceptors. The oxidative anionic/radical strategy also allows efficient termination by oxygenation with the free radical 2,2,6,6‐tetramethyl‐1‐piperidinoxyl, and two C?C bonds and one C?O bond are thus formed in the sequence. A stereochemical model is proposed that accounts for all of the experimental results and allows the prediction of the stereochemical outcome. Further transformations of the synthesized cyclopentanes are reported.     

不同变质程度煤的高分辨率透射电镜分析

利用高分辨率透射电子显微镜(HRTEM)分析了三种不同变质程度煤样的结构特征。基于傅里叶-反傅里叶变换方法,并结合Matlab、Arcgis和Auto CAD软件,通过图像分析技术,获得了HRTEM照片的晶格条纹参数。结果表明,三种煤样的晶格条纹呈现不同特征,按条纹长度分别归属于1×1-8×8共计八个类型。以3×3为临界点,在1×1和2×2中,ML-8中芳香层片的比例高于DP-4和XM-3;在3×3-8×8中,ML-8中芳香层片的比例低于DP-4和XM-3。对比HRTEM和XRD参数d002发现,随着镜质组反射率的增加d002都呈现递减趋势。     

Mechanism of Insertion Reactions between Silylenoid H2SiLiF and GeH3R (R =F,OH, NH2): a Theoretical Study

Theoretical investigations on the insertion reaction mechanisms of three- membered-ring silylenoid H2 Si Li F with GeH 3R(R = F, OH, NH2) have been systematically carried out by combined density functional theory(DFT) and ab initio quantum chemical calculations. The geometries of all stationary points for these reactions were optimized using the B3 LYP method and then the QCISD method was used to calculate the single-point energies. The calculated results indicate that, there are one precursor complex(Q), one transition state(TS), and one intermediate(IM) which connect the reactants and the products along the potential energy surface. The insertion reactions of three-membered-ring silylenoid with Ge H3 R proceed in a concerted manner, forming H2RSi-Ge H3 and Li F. The calculated potential energy barriers of the three reactions are 29.17, 30.90, and 54.07 k J/mol, and the reaction energies for the three reactions are –127.05, –116.91, and –103.31 k J/mol, respectively. The insertion reactions in solvents are similar to those in vacuum. Under the same situation, the insertion reactions should occur easily in the following order: GeH 3-F GeH 3-OH GeH 3-NH2. The elucidations of the mechanism of these insertion reactions provided a new mode of silicon-germanium bond formation.     

Fabrication and microstructural characterization of functionally graded porous acrylonitrile butadiene styrene and the effect of cellular morphology on creep behavior

The ability to control material properties in space and time for functionally graded viscoelastic materials makes them an asset where they can be adapted to different design requirements. The continuous microstructure makes them advantageous over conventional composite materials. Functionally graded porous structures have the added advantage over conventional functionally graded materials of offering a significant weight reduction compared to a minor drop in strength. Functionally graded porous structures of acrylonitrile butadiene styrene (ABS) had been fabricated with a solid‐state constrained foaming process. Correlating the microstructure to material properties requires a deterministic analysis of the cellular structure. This is accomplished by analyzing the scanning electron microscopy images with a locally adaptive image threshold technique based on variational energy minimization. This characterization technique of the cellular morphology is analyst independent and works very well for porous structures. Inferences are drawn from the effect of processing on microstructure and then correlated to creep strain and creep compliance. Creep is strongly correlated to porosity and pore sizes but more associated to the size than to porosity. The results show the potential of controlling the cellular morphology and hence tailoring creep strain/compliance of ABS to some desired values. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 795–803     

The Correlation of Electrochemical Measurements and Molecular Junction Conductance Simulations in β‐Strand Peptides

Understanding the electronic properties of single peptides is not only of fundamental importance, but it is also paramount to the realization of peptide‐based molecular electronic components. Electrochemical and theoretical studies are reported on two β‐strand‐based peptides, one with its backbone constrained with a triazole‐containing tether introduced by Huisgen cycloaddition (peptide 1 ) and the other a direct linear analogue (peptide 2 ). Density functional theory (DFT) and non‐equilibrium Green’s function were used to investigate conductance in molecular junctions containing peptides 3 and 4 (analogues of 1 and 2 ). Although the peptides share a common β‐strand conformation, they display vastly different electronic transport properties due to the presence (or absence) of the side‐bridge constraint and the associated effect on backbone rigidity. These studies reveal that the electron transfer rate constants of 1 and 2 , and the conductance calculated for 3 and 4 , differ by approximately one order of magnitude, thus providing two distinctly different conductance states and what is essentially a molecular switch. A definitive correlation of electrochemical measurements and molecular junction conductance simulations is demonstrated using two different charge transfer techniques. This study furthers our understanding of the electronic properties of peptides at the molecular level, which provides an opportunity to fine‐tune their molecular orbital energies through suitable structural manipulation.     

Specific Design of Titanium(IV) Phenolato Chelates Yields Stable and Accessible,Effective and Selective Anticancer Agents

Octahedral titanium(IV) complexes of phenolato hexadentate ligands were developed and showed very high stability for days in water solutions. In vitro cytotoxicity studies showed that, whereas tetrakis(phenolato) systems are generally of low activity presumably due to inaccessibility, smaller bis(phenolato)bis(alkoxo) complexes feature high anticancer activity and accessibility even without formulations, also toward a cisplatin‐resistant cell line. An all‐aliphatic control complex was unstable and inactive. A leading phenolato complex also revealed: 1) high durability in fully aqueous solutions; accordingly, negligible loss of activity after preincubation for three days in medium or in serum; 2) maximal cellular accumulation and induction of apoptosis following 24–48 h of administration; 3) reduced impact on noncancerous fibroblast cells; 4) in vivo efficacy toward lymphoma cells in murine model; 5) high activity in NCI‐60 panel, with average GI₅₀ of 4.6±2 μm . This newly developed family of Ti^IV complexes is thus of great potential for anticancer therapy.     

Structure,crystallization and dielectric resonances in 2–13 GHz of waste-derived glass-ceramic

Structure, kinetics of crystallization, and dielectric resonances of waste-derived glass-ceramic prepared via quench-heating route were studied as a function of dosage of iron ore tailing (IOT) within 20–40 wt% using X-ray diffraction (XRD), fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and vector network analyzer (VNA) measurements. The glass-ceramic mainly consisted of ferrite crystals embedded in borosilicate glass matrix. Crystallization kinetics and morphologies of ferrite crystals as well as coordination transformation of boron between [BO₄] and [BO₃] in glass network were adjustable by changing the amount of IOT. Dielectric resonances in 6–13 GHz were found to be dominated by oscillations of Ca²⁺ cations in glass network with [SiO₄] units on their neighboring sites. Ni²⁺ ions made a small contribution to those resonances. Diopside formed when IOT exceeded 35 wt%, which led to weakening of the resonances.     

Molecular Size and Electronic Structure Combined Effects on the Electrogenerated Chemiluminescence of Sulfurated Pyrene‐Cored Dendrimers

The electrochemistry, photophysics, and electrochemically generated chemiluminescence (ECL) of a family of polysulfurated dendrimers with a pyrene core have been thoroughly investigated and complemented by theoretical calculations. The redox and luminescence properties of dendrimers are dependent on the generation number. From low to higher generation it is both easier to reduce and oxidize them and the emission efficiency increases along the family, with respect to the polysulfurated pyrene core. The analysis of such data evidences that the formation of the singlet excited state by cation–anion annihilation is an energy‐deficient process and, thus, the ECL has been justified through the triplet–triplet annihilation pathway. The study of the dynamics of the ECL emission was achieved both experimentally and theoretically by molecular mechanics and quantum chemical calculations. It has allowed rationalization of a possible mechanism and the experimental dependence of the transient ECL on the dendrimer generation. The theoretically calculated Marcus electron‐transfer rate constant compares very well with that obtained by the finite element simulation of the whole ECL mechanism. This highlights the role played by the thioether dendrons in modulating the redox and photophysical properties, responsible for the occurrence and dynamics of the electron transfer involved in the ECL. Thus, the combination of experimental and computational results allows understanding of the dendrimer size dependence of the ECL transient signal as a result of factors affecting the annihilation electron transfer.